Features  

• it is coposed of pot body, lid, blender, electric oil heating clip tube, bearing and gear, seal equipment, oil spill trough
• it is installed with electric heating rods, temperature measurement. Due to the different production process and  operation environment, generally there are mixing forms such as anchored, pulp type, turbine type, push, or box type.pressure measurement table。
• There are hanging bearing block and the supportting type .Because of the different production process and operating conditions, electric heated reactor specifications are different. The actual situation can be customized according to the customer!
• Anchor style, frame style, oar style and turbo style.
• The rotation mechanism adopts cycloid needle-wheel decelerator and non-pele shift decelerator
• The seal device adopts mechanical seal,
• The heating or cooling adopts the nip-sheath structure,
• Steam -heating, electric heating,
• Motors: acid proof, alkali proof, high-temperature    proof, abrasion proof, and erosion proof etc.
• We can design according to the requirement of customer

Power Supply:  380V, 50/60Hz (Can be customized)

Materials:  The part contacting with materials is SS304 or SS316L.

Seal: Dual End Mechanical Seal (Pressure Balance Device is optional.

Technical parameter

Nominal Capacity（L）	Actual Capacity（L）	Electric Power（KW）	Jacket VOl （L）	Inner pot size （φmm）	Outer pot size （φmm）	reducer model	Power （n/kw）	speed （n/min）
50	61	3×2	95	400	600	m3	1450/0.6	60-80
100	120	6×2	120	500	700	m3	1450/0.6	60-80
200	247	6×3	200	600	800	m4	1450/1.5	60-80
300	355	6×3	250	700	900	m4	1450/1.5	60-80
500	589	9×4	290	900	1100	m6	1450/2.2	60-80
1000	1215	12×4	560	1200	1400	m8	1450/4	60-80
2000	2244	15×5	750	1400	1600	m8	1450/4	60-80
3000	3201	15×5	1015	1600	1800	m8	1450/7.5	60-80
4000	4020	15×5	1226	1600	1800	m10	1450/7.5	60-80
5000	5170	18×5	1400	1800	2000	m10	1450/7.5	60-80

Clip kit placed HTF It is heated by electric heating rod In the jacket, there are take over holes of oil taking, oil expelling, overflow measurement, shorting and electric rods, temperature etc. There is welding bearing outof the jacket, and a mout leak in the bottom of body.